Duty on a $10,000 entry of HTS 7304.39.00.16
| HTS line | What the line is | Rate | Duty on $10,000 |
|---|---|---|---|
| 7304.39.00.16 | Column 1 general rate | Free | $0.00 |
| 9903.82.02 | Section 232 metals Annex I-A (50%) | 50.00% | $5,000.00 |
| Total duty | 50.00% | $5,000.00 | |
| Merchandise processing fee (MPF) | $34.64 | ||
| Harbor maintenance fee (HMF, vessel arrivals) | $12.50 | ||
| Estimated landed cost of the goods | $15,047.14 | ||
An estimate for planning only: U.S. Customs and Border Protection (CBP) determines the final duty on your entry. Priced against tariff measures version 2026-10-06.
Antidumping and countervailing duties on HTS 7304.39.00 from India
HTS 7304.39.00 is named in the scope of a U.S. antidumping/countervailing duty order on goods from this origin: certain oil country tubular goods (A-533-857 / C-533-858, antidumping and countervailing duty orders of 10 September 2014; continued 12 August 2020 after the first sunset review; Commerce published the final results of the second sunset reviews on 8–9 January 2026). Scope is set by the product description, not the tariff code, so whether your goods are covered is a question for the broker of record; if they are, a cash deposit at the producer- or exporter-specific rate is due at entry on top of every line above, and the entry stays open until Commerce sets the final rate in an administrative review. None of that is in the figures on this page.
- A-533-857 / C-533-858 — certain oil country tubular goods, antidumping and countervailing duty orders of 10 September 2014. Federal Register notice
How much is the import duty on galvanized seamless steel tubes from India?
A shipment of galvanized seamless steel tubes classified under HTS 7304.39.00 and made in India currently pays a total of 50.00% in U.S. import duty. That total is built from two lines, not one: the Column 1 general rate of Free (this subheading is duty-free under the normal tariff), plus a Section 232 metals duty of 50.00% charged under Chapter 99. Customers who look up only the base rate in the tariff schedule and stop there are under-budgeting this shipment by 50.00%.
The duty stack, line by line
U.S. duty on this code is assembled from separate legal instruments, each with its own authority. Here is what each line on the entry is:
The base line is HTS 7304.39.00.16 itself at Free, the ordinary most-favored-nation rate that applies to every origin with normal trade relations with the United States.
HTS 9903.82.02 adds 50.00% under Section 232, the national-security tariff on aluminum, steel and copper articles — it follows the article rather than the country, so changing origin does not remove it (engine label: "Section 232 metals Annex I-A (50%)").
Worked example: a $10,000 shipment
Take one ocean shipment of galvanized seamless steel tubes with an entered value of $10,000 — the customs value of the goods, before freight and insurance. At 50.00%, the duty is $5,000.00. Of that, $0.00 is the Column 1 duty and $5,000.00 is Chapter 99 additional duty. On top of the duty, the entry attracts a merchandise processing fee of $34.64 and, because it arrives by vessel, a harbor maintenance fee of $12.50. Duty and fees together come to $5,047.14, and the engine puts the landed cost of the goods at $15,047.14.
These are ad valorem rates, so a $100,000 entry of the same goods carries about $50,000 in duty, though MPF is capped per entry. Run your own value, entry date and HTS code through the import duty calculator for the same calculation against the same engine.
What changed, and when
The rate here has been stable across the period we can price: an entry dated 15 October 2025 pays the same 50.00% that applies today. Stability is not a promise — Chapter 99 lists are amended by notice, sometimes with days of warning — but this subheading has not been a moving target from India.
An entry dated 15 May 2026 prices at 50.00%, the same total as today. The Section 122 balance-of-payments surcharge in force over that window (24 February to 23 July 2026, since expired) did not attach to this code.
MPF, HMF and what else lands on the entry
Duty is not the whole bill to Customs. The merchandise processing fee is ad valorem with a statutory floor and ceiling per entry — $34.64 on this $10,000 example. The harbor maintenance fee is charged on vessel arrivals only, $12.50 here; the same shipment flown in would pay no HMF.
Not in any of these figures: antidumping and countervailing duties, excise taxes, quota charges, bond costs, and the freight and brokerage that make up the rest of your landed cost. AD/CVD is worth checking before you commit to a supplier — it is assessed on the producer and exporter, not just on the HTS code, and it can dwarf the tariff.
U.S. imports of 7304.39.00 from India
Between March and July 2026 the U.S. imported $55 million under HTS 7304.39.00 from the 55 origins in this dataset; $6 million of it — 10.8% — came from India, making India a mid-sized supplier on this subheading. The largest were China (37.1%), Mexico (15.8%), India (10.8%), Italy (10.2%) and Germany (8.0%).
Census also reports duty actually collected: entries of HTS 7304.39.00.16 from India paid an average effective duty of 50.00% of value over those months. That tracks the 50.00% priced here closely, a good sign the stack above reflects what importers really pay. Treat it as a sanity check on your own numbers, not a forecast of your entry.
If you are moving this cargo rather than just pricing it, our India to USA shipping route page covers transit times, ports and documentation on the lane itself, and our Steel Logistics guide covers packing, classification and handling for this cargo type.
Planning around this number
Classification drives this: the page prices HTS 7304.39.00.16, the largest 10-digit line under 7304.39.00 for India by import value, and a neighboring line in the same subheading can carry different Chapter 99 exposure. Entry date matters as much as origin — the gap between the dates above is a change in law, not in your goods.
Airlift USA does not hold a U.S. customs broker license — customs entries are handled through our licensed broker network, and the broker of record makes the classification and origin calls. These figures are estimates for planning, produced by the same engine behind our import duty calculator; U.S. Customs and Border Protection determines the final duty on your entry.
How the duty on this shipment changed by entry date
| Entry date | Total rate | Duty on $10,000 | What applied |
|---|---|---|---|
| October 15, 2025 | 50.00% | $5,000.00 | Before the 2026 tariff actions |
| May 15, 2026 | 50.00% | $5,000.00 | During the Section 122 surcharge window (expired July 23, 2026) |
| Today (2026-10-06) | 50.00% | $5,000.00 | Measures in force now |
What HTS 7304.39.00.16 covers
Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel > Other, of circular cross section, of iron or nonalloy steel > Other > Other > Galvanized, having an outside diameter not exceeding 114.3 mm
Rates can differ from one 10-digit line to the next, so confirm your classification with a licensed customs broker before you rely on this figure. Other 10-digit lines under 7304.39.00: 7304.39.00.16, 7304.39.00.48, 7304.39.00.20, 7304.39.00.24, 7304.39.00.02, 7304.39.00.28, 7304.39.00.62, 7304.39.00.52, 7304.39.00.36, 7304.39.00.68, 7304.39.00.06, 7304.39.00.72, 7304.39.00.08, 7304.39.00.40, 7304.39.00.04, 7304.39.00.32, 7304.39.00.56, 7304.39.00.80.
Run your own numbers
Import duty calculator. The figures above are for a $10,000 entry. Estimate your landed duty on galvanized seamless steel tubes from India in the import duty calculator, at your own customs value and entry date, with every tariff line, MPF, HMF and the customs landed cost itemized.
Find your HTS code. Not sure galvanized seamless steel tubes belongs under HTS 7304.39.00? Look up another HTS code under heading 7304 in the HTS code lookup, with the duty rate on every line.
Get a quote to import galvanized seamless steel tubes from India
HTS 7304.39.00, India and today's 50.00% total duty rate are already in the notes. Add the cargo, its value, the ready date, and the pickup and delivery points. We reply with the freight rate, the destination charges and how the customs entry is handled through our licensed broker network.
Common questions about duty on HTS 7304.39.00 from India
What is the total import duty on galvanized seamless steel tubes (HTS 7304.39.00) from India?
50.00% of the entered value on an entry filed today. That is the Column 1 general rate of Free plus one Chapter 99 additional line (9903.82.02 at 50.00%). On a $10,000 entry that is $5,000.00 in duty, before MPF and HMF. It is an estimate for planning; CBP determines the final duty.
Can I avoid the Section 232 duty by sourcing from another country?
Usually not. Section 232 is a national-security measure that attaches to the article — its metal, automotive or wood content — rather than to a particular trading partner, and on this code it appears as 9903.82.02 at 50.00%. Changing origin can remove a Section 301 line, but the 232 line generally travels with the goods. Whether a specific article falls inside or outside a 232 derivative annex is a determination for your broker.
Do I pay MPF and HMF on top of this duty?
Yes. On the $10,000 example the merchandise processing fee is $34.64 and, for a vessel arrival, the harbor maintenance fee is $12.50. Neither is included in the 50.00% duty rate. Antidumping and countervailing duties, excise taxes and quota charges are also outside these figures and are checked separately at entry.
How much does the U.S. import under HTS 7304.39.00 from India?
$6 million between March and July 2026, which is 10.8% of the $55 million the U.S. imported under this subheading from the 55 origins in this dataset over the same months. Source: U.S. Census Bureau, imports for consumption, March–July 2026.
What these figures assume
The tariff engine flags the limits of its own answer. These applied to this calculation:
- Civil aircraft carve-out not applied: set civil_aircraft=true if the goods are entered under the civil-aircraft certification (General Note 6)
- Section 301 forced-labor duty not applied: the goods are under a Section 232 heading listed in U.S. note 52(f) (heading 9903.05.90)
- Antidumping/countervailing duties, excise taxes and quota provisions are not included
- Section 232 derivative articles outside HTS chapters 72–76 (U.S. note 16 lists) are not evaluated
- MPF and HMF use FY2027 rates; HMF applies to vessel arrivals only
Source for the import volumes and effective duty rates on this page: U.S. Census Bureau, imports for consumption, March–July 2026.